Accessories

Oscilloscope

Plexon resells the Hameg™ 507 digital oscilloscope for spike and analog signal monitoring.

 

 

 

 

 

 

 

 

 

 

BNC-16B

 

The Plexon BNC-16B is a rack-mountable interface panel with 16 signal-labeled BNC connectors for easy connectivity of analog input channels to external analog signals.

 

 

 

 

 

 

C-HUB

 

 

The Plexon C-HUB is an interface to most (but not all) of the inputs and outputs of the National Instruments 6071E A/D cards. The 6071E cards provide 64 channels of analog to digital conversion.

 

 

 

 

 

 

 

SCB-68

 

Plexon modifies and resells the National Instruments™ SCB-68 Breakout Box to facilitate interfacing with Plexon hardware and the National Instruments 16-channel A/D board PCI-6040E, PCI-6052E, and PCI-6070E.

 

 

Oscilloscope Features

• Bandwidth capability: 50 MHz in analog and digital mode with the press of one button
• Maximum sampling rate, real time: 100 MSa/s, 8 bit flash A/D
• Memory and display: 2k x 8 bit per channel
• Operating modes: Refresh, roll, single, XY, envelope, average, sampling
• Other features: Autoset, readout, cursor measurement, save/recall, RS-232 interface

BNC-16B Features

• 16 BNC connectors for signal monitoring or signal injection
• 37-pin D-sub connector
• 34-pin box header connector
• 2 16-jumper blocks for signal monitoring or signal injection
• rack-mounted and table-top configurations

C-HUB Features

• 64 analog inputs using four 16-channel connectors
• passive DC-coupled inputs
• no input filtering
• 2 common reference inputs
• rack-mounted or table-top configurations
• MAP TIM input connector
• NI PCI6071E A/D output connector
• 8 digital output lines
• BNC connectors for four of the digital output lines
• clock output connector from Recorder to CinePlex
• 2 BNC analog output connectors
• BNC output connector for precision pulses or clock signals using the PlexDO utility

SCB-68 Features

• MAP TIM input connector
• DB37 input connector
• BNC output connector
• 68-pin output connector
• 6 BNC input connectors (optional)

 

 

Oscilloscope Specs

 For more inormation on the Hameg 507 oscilloscope, visit Hameg's web site at www.hameg.de.

BNC-16B Specs

C-HUB Specs

 

SCB-68 Specs